I Can’t Log In to My Router Using the Default IP! What to do?

Are you stuck with the router IP not working issue? Every time you try to access the login and settings page of your router, you get the same “router IP not working” error message? If you nod in yes, then consider yourself lucky because you’ve redirected to the right post. Here, you will get one of the best troubleshooting tips that will help you fix the router IP not working issue in minutes. Let’s take the plunge!

Why You Are Getting the Issue?

Well, there can be endless reasons why you are unable to access the login and settings page of your router using its default IP. Below, we have listed some of the common yet major factors causing the issue. Scroll down a little!

Note: In this article, we have mentioned 4 router default IPs. But, you can use this guide for any router IP not working issue you are getting (apart from the mentioned ones also). Continue reading!

  • The cable connection between your router and modem is not accurate.
  • You haven’t used the correct IP address, 192.168.1.1 to log in to your router.
  • The firmware of your router is outdated.
  • WiFi signals of your router are getting interrupted.
  • Poor internet connectivity.
  • Bad placement of your router may also stop you from accessing the IP.
  • Hardware or software-related issues.

Now that you know the reasons behind the router IP not working issue, let’s proceed a little forwards to know how to troubleshoot it.

Solved: Router IP Not Working

Tip 1: Restart Your Router

Technical glitches in your router can also stop you from accessing the 192.168.1.0 IP. Don’t sweat over it! To do away with the issue, all you have to do is to restart your WiFi router.

Given below are the instructions that you need to follow in order to restart the device:

  • Ensure that all the WiFi-enabled devices are disconnected from your router.
  • Then, unplug your router from the wall outlet.
  • Allow the router to take some rest.
  • Then, plug your WiFi router back in.
  • Wait till the router’s power LED become green and stable. Just in case, the LED on your router continues to blink, wait for some time and let it be lit.

Now, connect your computer, laptop, or mobile device to the router’s WiFi and try to access 192.168.1.254 IP.

Tip 2: Use the Correct IP

Chances are that you didn’t enter the correct IP address in the URL bar of the internet browser while logging in to your router and accessing the settings page. But, worry not! Just ensure that you have entered the correct router’s IP address without typos in the URL bar field. Keep this in mind – IP address – if entered in the browser’s search bar field may give you router IP not working issue.

So, the next time you access the settings page of your router using 10.0.0.1 IP, keep the aforementioned tip into consideration.

Tip 3: Update Router Firmware

If you haven’t updated the firmware of your router yet, then also you might face a 192.168.1.1 IP not working issue. Thus, to troubleshoot the issue, update the firmware of your router right away.

For firmware update instructions, visit the official site of your device.

Tip 4: Check the Cable Connection

If the cable connection between your WiFi router and the existing modem is not accurate, then also you will experience a 192.168.1.0 IP not working issue. Thus, to do away with the problem, ensure that there is a solid and secure Ethernet connection between your router and modem. Besides, ensure that the cable/ wire you have used to connect your router and modem are in working condition.

Tip 5: Reset the Router

Last but not least, resetting your WiFi router back to the factory default values can also help you get rid of the 192.168.1.254 IP not working issue. In order to reset your WiFi router, do the following:

  • Keep your WiFi router plugged in.
  • But, disconnect the router from all the connected devices.
  • Then, locate the reset hole/button on your WiFi router.
  • Once found, press it gently, keep holding it for a few minutes.
  • Release it.

Now, try to access the 10.0.0.1 IP again and see if the resetting process has helped you out or not.

Was this article helpful? Do share your feedback with us!