In-Depth Guide to Resolve TP-Link Repeater Red Light Issue

If the LED on your TP-Link wireless repeater is blinking red instead of green, you are in big trouble. But, worry not because we have got you covered. In this article, we have listed down some of the most effective troubleshooting hacks following which you will easily be able to resolve the red light issue in a matter of minutes. Thus, scroll down and read on.

Resolved: TP-Link Repeater Flashing Red

  1. Reboot Your TP-Link Repeater

Technical glitches are one of the biggest reasons why the LED light on your tplinkrepeater is blinking red. To get rid of these glitches, you need to reboot your TP-Link wireless repeater. Here is how you can go about the rebooting process:

  • Disconnect all your client devices connected to the network of the repeater.
  • Turn off your TP-Link repeater and unplug it from its power source.
  • Wait for a couple of seconds.
  • Then, plug your TP-Link repeater back into its power socket and turn it on.
  • Reconnect all your client devices to the network of the repeater.

Now, check whether the TP-Link repeater red light issue persists. If it does, keep reading this post.

  1. Verify the Ethernet Connection

Check the Ethernet cable maintaining a connection between your TP-Link wireless repeater and your home router. Is it worn out or damaged? If yes, then it is recommended that you get it replaced with a new one.

If you are not in the mood of connecting your devices with the help of an Ethernet cable, consider using a wireless source for the same.

  1. Bring WiFi Devices Closer

Apart from ensuring a strong connection between your TP-Link wireless repeater and your home router, you need to make sure that the distance between them is accurate. By that we mean, your devices should not be placed far from each other.

In case they are, unplug your TP-Link wireless repeater from the power socket it is currently plugged into and plug it into the one located near your router.

  1. Update the Firmware

Performing TP-Link repeater firmware update can also help you troubleshoot the red light issue. Thus, follow the instructions mentioned below and learn how to update the firmware of your TP-Link wireless repeater to the latest version:

  • Switch on your PC.
  • Launch an internet browser as per your preference.
  • Download the firmware version for your TP-Link wireless repeater.
  • Extract the firmware file.
  • Open a new tab in your internet browser.
  • Type the default web address http tplinkrepeater net of your TP-Link wireless repeater.
  • Press the Enter key.
  • You will be taken to the official login page of your device.
  • Input the default admin username and password of your TP-Link repeater.
  • Click the Log In button.
  • You will get welcomed by the Quick Setup wizard.
  • Head over to the Settings menu.
  • Go to System Tools.
  • Click Firmware Upgrade.
  • Select Browse.
  • Your device will locate the firmware file you downloaded earlier.
  • Select Upload.

In a minute or two, the firmware of your TP-Link wireless repeater will get updated.

Note: If you are not comfortable updating the firmware of your device manually, you are free to opt for the TP Link app.

  1. Avoid Signal Interference

Make sure that your TP-Link wireless repeater and your home router are not placed anywhere near cordless phones, washing machines, baby monitors, mirrors, fish tanks, Bluetooth speakers, refrigerators, microwave ovens, treadmills, televisions, aluminium studs, corners, and concrete walls.

Also, do not keep your devices near utensils containing a large amount of water.

  1. Reset Your TP-Link Repeater

Did none of the aforementioned troubleshooting hacks help you get rid of the TP Link repeater red light issue? Well, in that case, your last resort is to perform factory default reset.

Once done with the reset process, do not forget to reconfigure your device.

Note: Whether you have performed TP Link AC750 setup or installed any other repeater model at home, the hacks mentioned above will remain the same for all.

Summing Up

With that, our guide to troubleshooting the TP-Link repeater red light issue has come to an end here. We hope that after following the troubleshooting hacks mentioned above, you will be able to get rid of the issue you were facing with your device. If you do, leave a word of appreciation in the comment section. We would love to read if we could be of some help.